Alexander
Australia has plenty of exciting places for outdoor trips. These are frequented by thousands of nature and adventure lovers every year. Most of them prefer exploring the Outback and coastal places using their SUVs and caravans. These users also utilise numerous third-party accessories to equip their cars for such adventures and tours. You will find several such people using safety cameras.
However, you must be careful in choosing the right safety camera for your vehicle. It is also essential to be aware of common performance and longevity issues associated with these devices. This will help you avoid many risks and problems on long outdoor tours in the country.
Top safety camera problems you must be aware of
Here is a list of key safety camera issues you must be aware of:
- Signal off- What if you find the monitor inside the car going blank? It indicates a signal loss. What can be the main causes? Well, you will have to check if there are any loose connectors or wires, to start with. Additionally, there can be interferences from UHF radios, Wi-Fi boosters, and other sources. For long trips on rough tracks, you should carry a spare connection cable or wireless transmitter.
- Poor image quality- What if your Safety Dave Camera is showing sub-par quality images? The reasons can include dust or mud gathering on the mirror. The camera may have an incorrect tilt or angle. Check the camera tilt and use a soft cloth to wipe the lens.
- Power issues- Some people also experience the camera turning off when on the roads, all of a sudden. There can be loose connections or shared circuits facing issues. In such cases, check the earth points and use a dedicated power line. You may also use a multimeter to check the voltage at the camera under load.
- Intermittent video feed- This can happen when you are driving on rough terrain and the constant vibrations loosen the connectors. Check the connectors well and use flexible conduit for added protection. In fact, it is wise to check the connectors regularly during long trips.
- Water ingress- This can happen after you drive in heavy rain or cross a low-lying water body, etc. If there are damaged seals or poorly fitted gaskets, camera performance will go down. In such cases, try to dry the housing immediately. Remove any moisture with a clean cloth. Let the camera dry completely before powering it back up to avoid hassles. Buy cameras with an IP67 or IP68 rating for a better experience.
- Other issues- In some large caravans, metal bodies can block wireless signals. Then you will have to reposition the transmitter. It may be a good idea to add a wireless repeater or booster for extra range. Also, you may use a wired setup.
Mother’s So-called Friend Caught on Camera via Nannycam Abusing 3-year-old
Summing it up
Before hitting the roads for an adventure in the Australian Outback, check car parts and external accessories carefully. You can also seek professional help. It is advisable to purchase all parts, including an external safety camera, from reputable sources.
